Nullifire FP170 Intucollar Intumescent Pipe Collar

What is Nullifire Nullifire FP170 Intucollar Intumescent Pipe Collar?

Nullifire FP170 Intucollar comprises of a stainless steel shell and a reactive intumescent lining. FP170 expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated by combustible pipes.

Nullifire FP170 Intucollar has been tested with combustible pipes (PVC, PE, PP, SanPVC, Bevex, etc.), insulated noncombustible pipes (steel) and network cable bundles (up to 125 mm).

Typically testing is carried out using (U/U) configuration for maximum coverage to many types of combustible pipe material.

FP170 Intucollar has been tested with combustible pipes (PVC, PE, PP, SanPVC, Bevex, etc.), insulated noncombustible pipes (steel) and network cable bundles (up to 125 mm).

Typically testing is carried out using (U/U) configuration for maximum coverage to many types of combustible pipe material.

Always read SDS, pre-application guidance and relevant application detail prior to application. Ensure the latest documents are downloaded prior to every project commencement.

Do not use around CPVC pipes; for this specific application, please use FS719 HP Blue for CPVC. Contact Tremco CPG technical for full requirements.

Safety data sheet must be read and understood before use.

Benefits of using Intucollar

• Up to 4 hours fire resistance – Tested to EN 1366-3.
• Tested for use with combustible pipes, insulated non-combustible pipes, cable bundles and Bevex pipes.
• Suitable on flexible rigid walls, rigid floors.
• Easy to install.
• Water resistant.
• Stainless steel shell.

For product and technical advice, contact our knowledgable and friendly team here.

 

 

Downloads