Adhesive Tapes are used for bonding, sealing & securing a vast number of substrates in varying environmental applications. However, most of these substrates are based around metals, plastics and wood all of which throw up complex challenges depending on the exact nature of the material. PAL in collaboration with illbruck offer comprehensive range of products, designed with these complex challenges in mind.
Illbruck TN021 is made from a composition of viscoelastic acrylic copolymers and monomers with glass microsphere fillers which is then extruded and cured using UV light. There are no solvents used during the manufacturing process. The product is naturally tacky and is capable of forming permanent bonds with many non-porous materials, in many cases eliminating the need for mechanical fasteners in extreme environmental conditions.
TN022 is a very high-performance glazing tape which has been developed to enhance the security of bomb blast protection windows and doors. The product is designed to replace the original internal gasket, bonding and sealing the glass unit to the frame with the ability to retain the glazing within the frame during and after an explosion. This has been tested in accordance with ISO 16933 : 2007 Glass in building – Explosion-resistant security glazing – Test and classification for arena air-blast loading.
TN012 is a single-sided EPDM closed cell foam. TN012 is used for seals required some fire and chemical resistance. It can also be used for open and closed seals. Excellent initial adhesion to a wide variety of substrates Good bonding to uneven surfaces & self-extinguishing. CFC and HCFC free.
Illbruck TN015 can be used for a wide range of applications requiring a positive water seal and good chemical resistance. It can also be used for open and close seals.
illbruck TN032 is a hig- performance aluminium foil. 35 micron bright finish, soft temper aluminium foil coated on one side, with pressure sensitive emulsion acrylic adhesive. TN032 gives a neat, attractive finish and provides protection and moisture vapour sealing on foil faced insulation materials, pipe insulation sections and metal ducting.
illbruck TP650 is an impregnated, pre-compressed multi-functional sealing tape. It is comprised of open-cell polyurethane soft foam, impregnated with flame-retardant synthetic resin. The different vapour diffusion properties are achieved through a unique, one-sided patented side impregnation. The impregnation also protects the tape against mould and fungi. TP650 utilises the property of water-vapour permeable sealing, making it less permeable inside than outside (inside tighter than outside principle) TP650 is used for sealing the perimeter joints of windows and doors against driving rain and provides airtightness and thermal insulation, thereby maintaining the energy performance of the window/door. Easy application with single product, complying with BS8213-4:2016 Code of Practice & GGF Guide to Good Practice – Installation of replacement windows and doors.
illbruck ME315 is a special tape with solvent free modified acrylic dispersion adhesive.
ME315 is a single-sided adhesive tape for interior and exterior use, providing a high performing air and weather tight seal. Suitable for a wide variety of applications including sealing of sheathing boards, slab edge details and the durable bonding of illbruck vapour barrier and breather membranes. A permanent bond is achieved on all tremco illbruck indoor and outdoor building protection membranes.
illbruck ME316 is a PP fleece with waterproof solid adhesive. This single-sided adhesive tape is suitable for interior & exterior use, providing a high performing air & weather-tightness seal. ME316 is suitable for a wide variety of applications, including sealing of sheathing boards and for the durable bonding of illbruck commercial vapour barrier and breather membranes. Particularly suited for sealing of joints between timber panels to maintain long-term performance. A permanent bond is achieved on all illbruck building protection membranes and PE, PA, PP, aluminium foils, concrete, brick and block, aerated concrete and wood used to create an airtight seal.
illbruck ME317 is a single-sided adhesive reinforced paper tape. For the airtight bonding of overlaps in illbruck vapour barrier and membranes for interior use. Also for joints in OSB boards and as an air-seal tape for penetrations.
ME316 is a single-sided adhesive reinforced paper tape. For the airtight bonding of overlaps with ME003 vapour barrier membrane, used internally. Also for joints in OSB boards and as an air-seal tape for penetrations.
illbruck ME404 is a solvent free, self-adhesive, plastic-elastic, butyl rubber sealing tape with high adhesive strength, laminated on one side with a plastic non-woven fleece. Butyl Tape Fleece is stable in form in the longitudinal direction, while in the transverse direction it has a permanent movement capacity of up to 10%.
ME480 is a membrane on a roll with fire classification B-s1, d0 to EN13501-1, composed of a laminate film with a layer of modified butyl rubber adhesive, aluminium foil finish and a siliconised release liner. ME480 has been specifically designed for construction applications where high fire retardent performance is required (e.g. tall buildings – Relevant Buildings >18 m high). Provides permanent watertightness, air tightness, compartmentalization and for repairs of vapour-impermeable joints and seals in construction applications.
Bonds with most normal building materials such as glass, steel, concrete, stone, wood and aluminium.
illbruck TN061 is a tissue tape supplied in 50m rolls, cut to required width. TN061 is designed for bonding lightweight, flexible components with a thin bond line. Hand tearable tape and high initial grab.
Illbruck TN062 is a polyester tape supplied in 50 m rolls, cut to required width. TN062 is designed for bonding lightweight, flexible components with a thin bond line. High shear resistant tape especially on metals.
illbruck TN063 is a double-sided polyester tape with red filmic release liner. TN063 is designed for bonding components with a thin bond line and high shear stress. High shear resistant tape with good chemical resistance and works well on low surface energy components.
illbruck TN106 is a double-sided EVA enhanced polyethylene foam with high shear acrylic adhesive.
TN106 is suitable for bonding to a wide range of smooth surfaces, including glass, PVCU, aluminium, treated timber, etc. It is used as a high-grade security glazing tape for bonding double glazed units into window frames. TN106 can also be used for a wide range of jointing and mounting applications.
illbruck TN113 is a self-adhesive foam tape. It is supplied in easy to use roll form. The product comprises a conformable 100% closed cell foam coated on one face with a high tack adhesive which is protected by siliconised paper liner. Being closed cell, the product forms an excellent air seal under moderate compression. When correctly applied it is capable of sealing ductwork to the Class C air leakage requirements of HVCA specification DW144.
illbruck TN119 is a closed-cell, reverse wound single sided PE foam tape used to provide an airtight seal around flange joints in HVAC ductwork. TN119 is a reverse wound self-adhesive foam tape. It is supplied in easy to use roll form. The product comprises a conformable 100% closed cell foam coated on one face with a high tack adhesive which is protected by filmic liner. Being closed cell, the product forms an excellent air seal under moderate compression.
illbruck TN124 is a double-sided polyethylene foam tape. TN124 is suitable for bonding to a wide range of smooth surfaces, including Glass, UPVC, aluminium, treated timber, etc. It can also be used as a primary seal in double glazed unit production. Closed cell foam with excellent ageing resistance.
illbruck TN131 is a self-adhesive, polyethylene foam tape, supplied in easy to use roll form.TN131 is a closed-cell, single or double-sided PE foam tape with very high conformability, used as a spacer tape between dissimilar metals, or where absorption of vibration, shock or expansion/contraction are required.
illbruck TN134 is a closed-cell, single or double-sided, self-adhesive PE foam tape with very high conformability. TN134 is used as a spacer tape between dissimilar metals, or where absorption of vibration, shock or expansion/contraction are required.
illbruck TN135 is a polyethylene double-sided foam tape that is coated on both sides with hot melt synthetic rubber resin adhesive. TN135 is suitable for general purpose mounting applications and conversion to pads. This product is not suitable for application where a high degree of UV exposure may occur. Designed for internal applications where bond strength is not critical such as posters, point of sale and light assembly work.
illbruck TN136 is a closed-cell, double-sided PE foam tape used to provide high-security glazing of externally beaded windows and doors. A very cost-effective method of maximising security levels of externally beaded windows and doors securely bonds the glass unit into the frame making removal from outside virtually impossible.
illbruck TN137 is a closed-cell, double-sided PE foam tape used for bonding mirrors to walls and panels in interior applications. A combination of instant grab and high shear strength provides a fast and secure method of mirror fixing 100% closed-cell PE foam tape unaffected by moisture or vapour, even in high humidity areas
High quality acrylic-based PSA adhesive ensures no chemical reaction with mirror backing.
illbruck TN141 is a polyethylene double-sided foam tape with high shear acrylic adhesive.TN141 is suitable for bonding to a wide range of smooth surfaces, including glass, PVCU, aluminium, treated timber, etc. Used for medium duty applications where higher temperature and good shear and peel characteristics are required such as cable trunking, signs and assembly works.
illbruck TN143 is a double-sided PE closed cell foam tape with modified solvent acrylic adhesive.TN143 is especially adapted for sealing applications in the mounting of body-sided trims and emblems in the automotive industry. It can also be used for badge mounting, nameplates and other applications with high temperature and UV light. Excellent resistance to UV, plasticisers, oils, solvent & humidity. Excellent compression resistance.
illbruck TN150 is a high-performance, double-sided bonding tape used for permanent mounting of signage, fixtures and panels, and industrial fabrication/assembly applications. High-tack pressure sensitive adhesive gives high instant grab and a strong permanent bond. A non-invasive alternative to mechanical fixings, avoiding penetration or damage of mounting surfaces. Quick and efficient to use – no odour, no drilling, no mixing, no waste.
illbruck TN171 is a high definition expanded physically cross-linked polyethylene foam, coated both sides with a high shear pure acrylic adhesive. TN171 is particularly suited to high tensile applications where twisting and torque may distort lower density foams. Ideal for optical lens grinding pads and high shear assembly and display works. High/low temperature stability. Excellent die-cutting stability with very high shear and torque resistance. Excellent UV resistance.
illbruck TN220 incorporates the very best quality open cell fire resistant foam bonded to a unique high -performance graphite intumescent material. Achieves class ‘0’ spread of flame as specified in British Building Regulations. It does not flame but slowly degrades and expands to leave an inert self- insulating char. It is available to seal gaps from 7 to 150 mm with a fire integrity of up to 2 hours. TN220 is designed for ease of installation. A cost-effective solution for stopping flexible gaps in fire rated building elements in internal applications. It can accommodate any gap from 7 to 150 mm, even irregular joints. Useful in cable trunking because it allows addition or removal of cables without damaging the seal.
illbruck TN414 is a cross-linked butyl pre-formed strip incorporating a continuous EPDM shim cord, supplied on fast release paper. TN414 is designed for factory and site use, including: compression glazing of timber and, where there are serrations on the metalwork, aluminium windows/doors; situations where tape is compressed to the shim, (i.e. glass/unit is to be held within a compression cushion of between 700 and 1750 N/m); and curtain wall and sloped glazing.
illbruck TN415. The water tank sealant market has found this product to be preferable to other methods of sealing flanges and lap joins on tank construction, due to its ease of use and solvent free formulation. Independently tested to BS6902 it is suitable for use in potable water applications.
illbruck TN525 is a self-adhesive medium density PVC foam tape with a pressure sensitive acrylic adhesive supplied on an easy to use roll. TN525 is a single sided medium density PVC foam tape which when compressed by 30% can be used to form a water and air/dust seal.
illbruck TN545 is a self-adhesive high-density PVC foam tape with a pressure sensitive acrylic adhesive supplied on an easy to use roll. TN545 is a single sided high density PVC foam tape which when compressed by 30% can be used to foam a water and air/dust seal. Suitable in applications requiring heavy compression. Excellent Insulation & performance against shock, vibration and movement. When under compression (30%), provides an effective weather seal against wind and rain.Provides a barrier to thermal bridging, galvanic corrosion and acoustic transmission.Pale blue release paper on the non-adhesive face to prevent stretching when applying and to protect the foam.
illbruck TN550 is a self-adhesive PVC foam tape with pressure sensitive acrylic adhesive, supplied on an easy to use roll. TN550 is a high-performance, double-sided PVC foam tape used to provide high security glazing of externally beaded windows and doors. The double thickness adhesive with tissue interlayer on the DST format is designed to prevent damage by the adhesive to sensitive substrates due to plasticiser migration.
illbruck TN551 is soft fast recovery PVC foam coated on one side with a pressure sensitive acrylic adhesive. The non-adhesive face has a fixed clear PET liner to allow for easy smooth unwind and no paper liner. The high tack acrylic adhesive bonds to a wide variety of surfaces including, glass, aluminium, HD plastics and others.
TN551 is a medium density PVC foam with a fixed polyester liner on one side and acrylic adhesive on the other. Supplied as a self-wound tape. Is ideal for use in cladding, industrial doors and acoustic panelling as an air, dust, water and acoustic seal.
illbruck TN553 is a self-adhesive PVC foam tape with pressure sensitive acrylic adhesive, supplied on an easy to use roll. TN553 is a single-sided PVC foam tape with high conformability, used as an insulation tape to absorb vibration/ shock, or where an acoustic seal is required.
illbruck TN557 is a single sided PVC foam. TN557 was developed as a low tack protection pad that is easily removable for glass, ceramic, plastic and polished sheets. Designed to protect during transit.
illbruck TN563 is a self-adhesive PVC foam tape with pressure sensitive acrylic adhesive supplied on an easy to use roll.TN563 is a single-sided PVC foam tape which can be used either uncompressed (as an acoustic or dust seal), or at 30% compression (as an air or weather seal).
illbruck TN573 is a 1 mm thick, self-adhesive PVC foam tape with pressure sensitive acrylic adhesive, supplied on an easy to use roll. It can be used in narrow gap widths, to provide an effective weather seal even with only a low level of compression. Excellent Insulation performance against shock, vibration and movement
Provides an effective weather seal against wind and rain, even under minimal levels of compression.
Provides a barrier to thermal bridging, galvanic corrosion and acoustic transmission.
illbruck TP300 is an open cell polyurethane foam tape, impregnated with a bitumen free acrylic resin, with the main functions of a weather and acoustic seal and backing for sealant joints where the tape will act as a secondary seal.
illbruck TP450 is a soft and flexible open cell polyurethane foam, impregnated with an acrylic based, UV stabilised resin. It provides a weather tight seal against the most severe combinations of wind & rain. TP450 provides a weather tight seal against the most severe combinations of wind and rain, with particular suitability for sealing the head and sills of windows installed in timber frame construction and can accommodate up to 37 mm of differential movement within a max. 50 mm wide joint. Extensively tested with BBA accreditation, TP450 has a proven reputation across both the UK and Europe.
illbruck TP600 is an impregnated joint sealing tape for use in a wide variety of movement joints including window perimeter seals and other applications. TP600 is an impregnated joint sealing tape for use in a wide variety of movement joints including window perimeter seals and other applications. Weather tight against the most severe combinations of wind and rain, it satisfies most expectations as an external weather seal in building and civil engineering applications. With full BBA approval, the product has been extensively tested and has a proven reputation across both the UK and Europe. BBA Certificate N° 96/3309 and, as part of the i3 system, N° 12/4891.
illbruck TP601 is a weather-retardant, impregnated, open-cell, polyurethane soft foam, enclosed before use in a polypropylene film with a bonding adhesive on one side for fixing. TP601 is an impregnated, pre-compressed foam sealing tape, encapsulated before use in a tear-off, polypropylene film with a bonding adhesive on one side for installation. The tape is intended for the external, recessed perimeter sealing of windows and doors with the same high-performance characteristics as TP600. The tear-off, encapsulating film permits the post-installation expansion of the foam strip, thus ensuring an effective weather seal.
illbruck TP605 is an acrylic impregnated foam sealant strip which when used under compression provides a high performance weatherseal. It can be used internally & externally for the linear sealing of movement joints.
TP605 Compriband Super is designed for use internally or externally for the linear sealing of movement joints in a wide variety of construction and civil engineering applications, for example in brick and block work walls, partitions, as a perimeter seal around window and door frames, sealing pre-cast concrete panels, sectional buildings and insulated cladding panels.
illbruck TP651 is an impregnated, pre-compressed multi-functional sealing tape. It is comprised of open-cell polyurethane soft foam, impregnated with flame-retardant synthetic resin. The different vapour diffusion properties are achieved through a unique, one-sided patented side impregnation. The impregnation also protects the tape against mould and fungi. TP651 utilises the property of water-vapour permeable sealing, making it less permeable inside than outside (inside tighter than outside principle).
illbruck TP652 is a flexible polyurethane foam impregnated with flame-retarding modified synthetic resin. It differs from standard impregnated foams due to the innovative illbruck composite step technology.
This multi-functional sealing tape is used to provide an airtight and driving rain-resistant seal to window and door joints while also having thermal-insulating properties across the entire depth of the perimeter gap. The newly developed inner step band and the greater interior compression from it meets demands in Passive Housing, new building and renovation. TP652 meets the requirement “tighter inside than out“ in relation to water vapour diffusion according to the RAL assembly guidelines.
illbruck TP652 LL is a soft and flexible open cell polyurethane foam, impregnated with an acrylic based, flame retardant resin. It is supplied as pre-compressed rolls with a liner-less self-adhesive side to aid initial location.TP652 LL seals window and door perimeter joints against wind and driving rain whilst providing thermal and acoustic insulation for the full joint depth. The innovative additional ‘step’ band provides higher compression which fulfils airtightness requirements for Passiv-House, new build and renovation projects. TP652 LL ensures vapour control based on ‘inside tighter than outside’ principles in accordance with RAL window installation guidelines. The patented ‘liner-less’ technology provides fast and easy application.
illbruck TP653 Trio X flexible open cell polyurethane foam impregnated with a flame-retardant acrylic resin. The face installed to the internal side of the tape is coated with a thin polymer film. Solvent-free, single-sided self-adhesive for initial location to window frame. TP653 is free from halogen-containing flame retardants, solvent, silicone and (H) CFC’s. TP653 is a premium multi-functional tape for the perimeter sealing of windows and doors and is covered on the internal face with the new illbruck polymer film. This results in a high level of air and smoke tightness and a higher sd value to the inside whilst being vapour permeable to the outside. This complies with the principle ‘inside tighter than outside’ per the RAL guideline.